A Alden company - serving Fresno, CA

Icynene Insulation Removal Nationwide

Icynene Insulation Removal in Fresno: What to Know First

We remove Icynene spray foam insulation in Fresno homes, typically completing the job in one to two days depending on square footage and how thoroughly the foam has bonded to the framing. Independent Icynene service providers like us handle removals that other contractors won’t touch, because spray foam removal is slow, messy, and unforgiving if you rush it. Most Fresno Icynene removal projects run $3,200 – $6,800, and we give you a written price before any tool comes off the truck.

Call (559) 666-2260

This page is for homeowners whose Icynene insulation has failed, outgassed, been damaged by rodents or roof leaks, or was installed incorrectly in the first place. If you’re dealing with crumbling foam, persistent chemical smells, or an attic that won’t hold temperature, call us at (559) 666-2260. We’ll tell you whether removal is actually necessary or if a targeted fix makes more sense.

How Icynene Products Fail – and How We Fix Them

  • Open-cell shrinkage in older Icynene Classic installations. Icynene’s original open-cell formula, common in Fresno homes built or retrofitted in the early 2000s, is prone to pulling away from rafters over two decades of Central Valley heat cycling. We see gaps forming at the top plates in Tower District bungalows and older Clovis ranch homes. When that happens, the foam isn’t sealing anything anymore. Removal is the only honest fix, then we re-insulate correctly.
  • Closed-cell delamination from roof leaks. Icynene ProSeal and ProSeal LE are closed-cell products. They’re dense and water-resistant, but a persistent roof leak will eventually break the bond between the foam and the roof deck. Once water gets behind closed-cell, it sits there and rots the sheathing. You won’t see it from below. Removal gives us a clean look at what the water actually did, and a clean surface for new insulation.
  • Chemical odor from an off-ratio spray. If an Icynene job was sprayed with the wrong A-to-B ratio, the foam never cures properly and off-gasses for years. We’ve had homeowners in Woodward Park describe it as a fishy or amine smell that gets worse in summer. This is dangerous, not just unpleasant. The bad foam has to come out, the framing needs to air, and only then should anything go back in. Bryce Holloway has walked homeowners through this exact scenario more times than he’d like to count.
  • Rodent tunneling in open-cell Icynene. Rats and mice love soft open-cell foam. Icynene Classic and Icynene LD-C-50 are easy for rodents to tunnel through, and once they’ve nested, the foam is loaded with droppings and urine. Fresno’s older neighborhoods near irrigation canals see this regularly. We remove the contaminated foam, air-seal the entry points, and install a product better suited to pest resistance.
  • DIY or unpermitted retrofit damage. We regularly see Icynene installations where a previous contractor sprayed over existing fiberglass batts, sprayed around live knob-and-tube wiring, or buried bathroom exhaust vents. Manufacturers void warranties over exactly these installs. Removal is the first step to correcting a bad retrofit before it causes framing rot or a fire hazard.

Our Icynene Insulation Removal Process

  1. 1
    Call and assessment. You call (559) 666-2260, a live person answers, and we schedule a visit. We inspect the attic, identify the Icynene product type, and determine the removal scope. We measure thickness, check for moisture, and tell you honestly whether full removal is necessary.
  2. 2
    Written price before work starts. We hand you a written price for the entire removal. That number doesn’t move. It covers containment, labor, disposal, and cleanup.
  3. 3
    Containment and protection. We seal off the attic access, lay floor protection, and run negative air where needed. Spray foam removal kicks up fine dust, and we don’t let that dust into your living space. Our technicians arrive background-checked and in uniform, and they treat your home like it’s occupied, because it is.
  4. 4
    Removal by hand and tool. We cut, scrape, and remove foam section by section, working around wiring, plumbing, and framing. This is slow work. We don’t rush it. The goal is to leave clean framing, not to break a record for speed.
  5. 5
    Inspection, cleanup, and the 365-Day Done Right Promise. Once the foam is out, we inspect the framing and sheathing for hidden damage, then we clean the attic and the work path. Every removal is covered by our written 365-day guarantee. If anything we worked on fails within a year, we return at no charge. That’s The Garrison Standard, and it applies to every job we do in Fresno.

What Icynene Insulation Removal Costs in Fresno

Here’s what we typically see in Fresno:

  • Partial removal (200 – 400 sq. ft. of failed foam): $1,800 – $3,200
  • Full attic open-cell removal (small to mid-size homes): $3,200 – $5,400
  • Full attic closed-cell removal (ProSeal, ProSeal LE): $4,500 – $6,800
  • Contaminated foam removal (rodent or water damage): adds $400 – $900 for sanitizing and disposal

What moves the price: attic size, foam thickness, whether it’s open-cell or closed-cell (closed-cell is denser and harder to remove), how badly it’s adhered to the sheathing, and whether pest or water remediation is needed. Removal jobs with easier access or thinner foam run lower. Call (559) 666-2260 for a written estimate. Free, no games, and the number you see is the number you pay.

Why Fresno Homeowners Call Alden Insulation Fresno for Icynene Work

We’re part of the Garrison Partners family, established 2002, and we operate under The Garrison Standard: written prices, written guarantees, background-checked uniformed technicians, and a live person answering the phone 24/7. We install and remove insulation using products from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, so we’re never tied to one manufacturer’s solution. If your Icynene failed and you want something else, we’ll help you pick the right replacement. We also service Reflectix installations, for radiant barrier work. Bryce Holloway has spent most of two decades figuring out what insulation actually does to a house across every season, and his crew has run jobs from older bungalows in the Tower District to newer builds out past Shaw Avenue. Good insulation doesn’t make the news. That’s the point. We’ll give you a straight assessment, a written price, and a job done right the first time.

FAQs

Need Insulation help in Fresno? Licensed & insured · same-day response · free estimates
Call (559) 666-2260
Local Service Coverage

Request a Free Estimate in Fresno

Tell us what you need - Alden Insulation Fresno responds fast. No obligation.

When you submit this form, you acknowledge our Privacy Policy and consent to receive communications by telephone, text message, or email about your service request, including from the local pros who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch